Cam Kenar Uygulamaları

Ürün Kodu : 1518 Marka : TurkishStocks


GLASS EDGE PROCESSING BEVELLING It is the process of polishing the glass edge at 90 ° and the front edge of the glass at the desired angle. Bevel width varies with angle. CHANNEL OPENING Engraving the surface of the glass along a line at a depth of 2 mm is called shaping. RODAJE It is the process of polishing glass edges and corners. Glass rim and belt receiving the sharpness of the corner processing run in, 90 ° and 45 ° angle with the polishing of the flat grinding, while the polishing of the


TELEFONDA SİPARİŞ VER

+90 2164423236

Tıklayın, telefonunuzu bırakın. Sizi arayalım.


GLASS EDGE PROCESSING

BEVELLING
It is the process of polishing the glass edge at 90 ° and the front edge of the glass at the desired angle. Bevel width varies with angle.

PRODUCTION LIMITS
MAX: 2000 x 2500 mm, MIN: 150 x 150 mm


CHANNEL OPENING
Engraving the surface of the glass along a line at a depth of 2 mm is called shaping.

RODAJE
It is the process of polishing glass edges and corners. The process of removing the sharpness of the edges and corners of the glass is called band lapping, the polishing process with 90 ° and 45 ° gradients, flat lapping, arc lapping, and lapping gradually, profile lapping. Polishing is the polishing of the matting cutting surface after grinding in a second process.

PRODUCTION LIMITS
MAX: 2600 x 4000 mm, MIN: 300 x 300 mm

Yeni çıkan ürünlerden haberdar olmak için bültenimize kaydolun.

Alışveriş Sepetim